Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dest NAT on PIX

I have a SUN server on the inside of my LAN which is trying

to connect to an incorrect IP address - unfortunatly this is an

old applicaiton and can not be changed. Can I force the server

to send this address to my PIX firewall and then NAT that to

the correct address which is on the outside of the firewall. How

do I do this on PIX ?

Thanks

1 REPLY
New Member

Re: dest NAT on PIX

While it wasn't really designed to do this, you could try using the alias command to dnat the packets. Take a look at the command reference for usage guidelines: http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/a.htm#xtocid6

83
Views
0
Helpful
1
Replies
CreatePlease login to create content