Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Determining which dram simm slots are occupied in a 3640

I need to determine which simm slots are occupied in a 3640 remotely without opening the case. Is there any command for this? If it's show tech, which part? I can see the total installed amount, but can't determine if all 4 slots are occupied or only one or two. All routers have 64MB dram.

3 REPLIES
Silver

Re: Determining which dram simm slots are occupied in a 3640

in your sh ver there will be a line like this

DRAM configuration is 64 bits wide with parity disabled.

It depends on if you have 32 or 64 bit wide memory .

If you have 64 bit then the options for 64MB of RAM are

4 X 16

2 X 32

If you have 32 bit wide the options are

4 X 16

that is the best it can be narrowed down without opening the box

New Member

Re: Determining which dram simm slots are occupied in a 3640

Thanks, that's more than I got from TAC! I have 64b so I'm still guessing.

Re: Determining which dram simm slots are occupied in a 3640

190
Views
0
Helpful
3
Replies