Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Device power consumption

Hi all!

Is there any way to get real time power consumption data from the Cisco device (7606 and ASR9000).

When I do sh power on 7606 I get something like this:

system power redundancy mode = redundant
system power total =     2669.10 Watts (63.55 Amps @ 42V)
system power used =      1792.98 Watts (42.69 Amps @ 42V)
system power available =  876.12 Watts (20.86 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    PWR-2700-AC        2669.10 63.55  OK     OK     on
2    PWR-2700-AC        2669.10 63.55  OK     OK     on
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    FAN-MOD-6SHS        180.18  4.29  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    WS-X6708-10GE       444.36 10.58   444.36 10.58  on    on
2    WS-X6748-SFP        292.74  6.97   292.74  6.97  on    on
4    WS-X6748-SFP        254.94  6.07   254.94  6.07  on    on
5    RSP720-3C-GE        310.38  7.39   310.38  7.39  on    on
6    WS-SVC-FWM-1        310.38  7.39   310.38  7.39  on    on

"System power used" value never change in time so I guess it is not real time value? Am I wrong?

What is command to see power consumption on ASR9000 (sh power on 7600)?

Thanks, regards

133
Views
0
Helpful
0
Replies