10-16-2002 04:27 AM - edited 03-02-2019 02:07 AM
I keep getting Resource Exception - ExccessiveFragmenttaion all the time from a number of our switches. Looking at the Cisco Website, it could be a number of problems from cpu to memory ranging from
Memory Fragmentation Threshold
Memory Buffer Miss Threshold
Memory Buffer Utilization Threshold
Free Memory Threshold
Doing a show version showed this:
DRAM FLASH NVRAM
Total Used Free Total Used Free Total Used Free
------- ------- ------- ------- ------- ------- ----- ----- -----
65536K 33645K 31891K 16384K 5163K 11221K 480K 197K 283K
Which shows a lot left for utlization. Please do I ignore this message. And if not, what more do I need to do.
Thanks for your help.
Solved! Go to Solution.
10-16-2002 08:52 AM
What version of DFM are you using?. Make sure that you have installed the latest IDU for DFM which have fixes for this and other bugs as well.
10-16-2002 04:31 AM
It could be bogus. Take a look at CSCdu56631
http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCdu56631
10-16-2002 08:52 AM
What version of DFM are you using?. Make sure that you have installed the latest IDU for DFM which have fixes for this and other bugs as well.
10-22-2002 01:42 AM
Thank you very much. The latest patch sorted the problems.
Thanks
10-17-2002 06:25 AM
This is definitely CSCdu56631. It has been fixed in DFM 1.1.1 which was carried on to 1.1.2. Please refer to the readme file of patch 1.1.2
CSCdu56631
Externally found moderate defect: Verified (V)
DFM shows bogus Memory ExcessiveFragmentation faults for Catalyst
http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm
Ming
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide