Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DFM RME Adapter - DFM truncates RME Device List

DFM Install Doco reads:

If you use the RME Adapter to synchronize the DFM inventory with a list of Essentials devices, and the synchronization causes DFM to exceed this limit, the Essentials device list will be truncated

Has anyone seen this behaviour? What exactly happens? Is there a way to avoid this behaviour but still retain the very useful feature of automatically populating DFM with RME devcies?

Thanks in advance

1 REPLY
Blue

Re: DFM RME Adapter - DFM truncates RME Device List

From: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/dfm/dfm_faq.htm#xtocid17

Q) How many devices can DFM manage?:

A) Standalone DFM can manage up to 1,000 devices and 30,000 ports (of which 15%, or 4,500, are managed ports). If DFM is installed with the LAN Management Solution (LMS) bundle, the bundle limit is 500 devices and the same number of ports (see http://www.cisco.com/warp/public/cc/pd/wr2k/lnmn/). You may occasionally want to verify how many ports are currently managed.

92
Views
1
Helpful
1
Replies