I'm having problems understanding the user guide's explaination of how to modify a subscription profile via the Monitor Console>Event>Maintain Profile... gui. I have a user who is only interested in seeing alarms from a small subset of switches on our network. Can someone give me examples of what to enter for "Classes, Instances, Events, etc." to accomplish this? The current profile for this user is the default and of course is filling the alarm console with events that this user is not interested in. How do I set up his profile to only notify on Switches and only "some" Switches? Thanks
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...