Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DFM with a 1200AP running IOS v12.2

Will DFM monitor and report for the AP1200 running the IOS version 12.2?

2 REPLIES
Blue

Re: DFM with a 1200AP running IOS v12.2

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/dfm/dev_sup/dfm1_2.htm

If you have the latest DFM 1.2, with IDU 1.2.5, then AP1200 are supported but only Partial DFM support is present. Partial DFM support" indicates DFM will manage the device but may not report all device attributes because (1) the device operating system does not support one or more of the MIBs polled by DFM, and/or (2) the device MIB contains information that is not correctly populated.

New Member

Re: DFM with a 1200AP running IOS v12.2

Thanks for the info, that is what I was looking for.

84
Views
0
Helpful
2
Replies