DHCP for incomming bri users could not access the network
I have configured cisco 2621 router for one incomming bri session, such that user when dials get the ip addrss form Winnt DHCP server, But could not communicate form the network i-e nor ping the same network or communicate.
Even entring the static route. But gets ip address from dhcp server, but could not use the network.
Re: DHCP for incomming bri users could not access the network
Thats a bit unusual. Is this config from the dialer router or the dialed router? You have "ip address negotiated" on its BRI which makes it look like as if its the dialer side and looking for an ip address from the dialed router but then you also have "peer default ip address dhcp" which makes it look like a
dialed router which will assign an ip address to the
dialer through the DHCP server at 172.16.1.2. Regardless you are missing "ppp authen pap callin" on BRI as well as "dialer-group 1" and then "dialer-
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.