Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

DHCP on 2600

Hi,

I have problem with enabling dhcp on my 2611 router which has 11.3(10)T IOS. It doesn't accept "ip dhcp pool ..." command. Is it because of old IOS? If so, which version ahould I have as minimum to be able to setup DHCP and NAT?

Thanks in advance,

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: DHCP on 2600

Ali

Yes I believe that your problem is old software. I checked the feature navigator on CCO and it shows DHCP being available for 2611 beginning in 12.0T. So 12.0T, 12.1 mainline or anything more recent should do for you.

HTH

Rick

1 REPLY
Hall of Fame Super Gold

Re: DHCP on 2600

Ali

Yes I believe that your problem is old software. I checked the feature navigator on CCO and it shows DHCP being available for 2611 beginning in 12.0T. So 12.0T, 12.1 mainline or anything more recent should do for you.

HTH

Rick

103
Views
0
Helpful
1
Replies
CreatePlease to create content