Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP problem on Catalyst 2960

Client PC is unable to obtain DHCP IP address from Cat-2960 (cisco WS-C2960-24TT-L). Any advice would be greatly appreciated.

---Portfast is enabled on all ports---

ip dhcp limited-broadcast-address

ip dhcp excluded-address 192.168.1.1 192.168.1.6

!

ip dhcp pool XXX

network 192.168.1.0 255.255.255.224

dns-server 199.45.32.38 151.197.0.38

domain-name XXX.com

default-router 192.168.1.2

netbios-node-type h-node

lease 30

!

Switch-2960#sh ip dhcp binding

IP address Client-ID/ Lease expiration Type

Hardware address

Switch-2960#sh ip dhcp server stat

Memory usage 1390

Address pools 1

Database agents 0

Automatic bindings 0

Manual bindings 0

Expired bindings 0

Malformed messages 0

Message Received

BOOTREQUEST 0

DHCPDISCOVER 0

DHCPREQUEST 0

DHCPDECLINE 0

DHCPRELEASE 0

DHCPINFORM 0

Message Sent

BOOTREPLY 0

DHCPOFFER 0

DHCPACK 0

DHCPNAK 0

Regards,

Santi

1 REPLY
Purple

Re: DHCP problem on Catalyst 2960

Make sure you apply the "switchport host" command to all client ports and see if that helps . Are these clients all on the same subnet (vlan) ???

411
Views
0
Helpful
1
Replies
CreatePlease login to create content