Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

dhcp server for IP Addresses and relay for certain options?

Hello,

I would like to know if TODAY (let's say with my 1841 router in 12.4(15)T5) it was possible for a router to act as DHCP server regarding the IP address pool but to forward another options (like dns, WINS) to another DHCP server ?

The only I have found which can be nice is DHCP server Option import ( => http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1009276) but it requires another interface to be configured with 'ip address dhcp').

I doubt it is possible without using this scenario but it would be nice if someone can confirm me (or invalidate) this.

Thanks a lot.

Karim

1 ACCEPTED SOLUTION

Accepted Solutions

Re: dhcp server for IP Addresses and relay for certain options?

Hi Ganesh,

Thanks for your answer.

My question is in fact :

Can a routeur (1841 in the IOS version) be at the same time DHCP server (for example for ip addresses) and DHCP relay for other options (dns, wins) on the same interface WITHOUT using the 'import all' command under dhcp-pool config mode along with the 'ip address dhcp' in another interface.

Thank you very much for your help.

Regards.

Karim

Hi Karim,

"Import all" feature is used to allow configuration information to be updated automatically.Network administrators can configure one or more centralized DHCP servers to update specific DHCP options within the DHCP pools. The remote servers can request or "import" these option parameters from the centralized servers.

Check out the below link on breif configuration of import all feature usage and hope that clears your query also !!

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1010265

Ganesh.H

4 REPLIES

Re: dhcp server for IP Addresses and relay for certain options?

Hello,

I would like to know if TODAY (let's say with my 1841 router in 12.4(15)T5) it was possible for a router to act as DHCP server regarding the IP address pool but to forward another options (like dns, WINS) to another DHCP server ?

The only I have found which can be nice is DHCP server Option import ( => http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1009276) but it requires another interface to be configured with 'ip address dhcp').

I doubt it is possible without using this scenario but it would be nice if someone can confirm me (or invalidate) this.

Thanks a lot.

Karim

Hi Karim,

Check out the below link on DHCP server configuration on cisco 1800 series routers hope that help !!

http://www.cisco.com/en/US/docs/routers/access/1800/1801/software/configuration/guide/dhcpvlan.html#wp999387

Remember to rate the useful post !!

Ganesh.H

Silver

Re: dhcp server for IP Addresses and relay for certain options?

Hi Ganesh,

Thanks for your answer.

My question is in fact :

Can a routeur (1841 in the IOS version) be at the same time DHCP server (for example for ip addresses) and DHCP relay for other options (dns, wins) on the same interface WITHOUT using the 'import all' command under dhcp-pool config mode along with the 'ip address dhcp' in another interface.

Thank you very much for your help.

Regards.

Karim

Re: dhcp server for IP Addresses and relay for certain options?

Hi Ganesh,

Thanks for your answer.

My question is in fact :

Can a routeur (1841 in the IOS version) be at the same time DHCP server (for example for ip addresses) and DHCP relay for other options (dns, wins) on the same interface WITHOUT using the 'import all' command under dhcp-pool config mode along with the 'ip address dhcp' in another interface.

Thank you very much for your help.

Regards.

Karim

Hi Karim,

"Import all" feature is used to allow configuration information to be updated automatically.Network administrators can configure one or more centralized DHCP servers to update specific DHCP options within the DHCP pools. The remote servers can request or "import" these option parameters from the centralized servers.

Check out the below link on breif configuration of import all feature usage and hope that clears your query also !!

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1010265

Ganesh.H

Silver

Re: dhcp server for IP Addresses and relay for certain options?

That's fine !

Regards

Karim

622
Views
5
Helpful
4
Replies