The helper address in vlan305 should work, assuming that the address specified in the helper address is the address of the DHCP server. If the PCs in vlan305 are not getting addresses I would look toward some issue in the DHCP server. Are there logs on the server that might indicate what is going on? Does the server see the request for addresses from the clients in vlan305? Does the server have appropriate scope defined for vlan305?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...