Does anyone know how to configure a Cisco router so that when a PC is assigned an IP address from its DHCP server, it will create an entry in its internal DNS host table (show host) based on the hostname provided in the DHCP request?
I've already tried using the following commands:
ip dhcp update dns both override
ip ddns update method
The router doesn't seem to understand that it is the authoritative DNS server for the client PCs, so it queries the upstream DNS server.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...