I am looking for the simplest Cisco hardware solution for allowing a remote user to access a LAN over analog POTS line. I have found that this is possible with a Cisco 1721 access router and an analog modem interface card (WIC-1AM), but I find this solution too expensive. Is there a lower end access router that allows POTS dial-in access? Cisco 800 and SOHO series seem to only allow ISDN and ADSL access.
You could use a c1721 with a normal modem connected to the AUX port (this could even be an ISDN TA able to answer V90 incoming calls to allo 56Kbps speed) or a cisco 805 (which has a sync/async serial interface) using a db60/V25 cable to the same modem.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.