Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Dial in to CON port on a 806 router?!?

since the 806 router dosn't have an AUX port, can I dial-in to the console port? If not, how do I go about configuring it remotely if the line fails

4 REPLIES

Re: Dial in to CON port on a 806 router?!?

what modem are you using with 806. US robotics would need special configuration of the modem, before dialing in....also you need to put some commands in the line con 0 mode.

http://www.cisco.com/en/US/tech/tk13/tk426/technologies_configuration_example09186a00800941c9.shtml

is a sample link for USR modem.

Some modems like Zoom, needs string configured in them too...Let us know what modem you ar eusing.

New Member

Re: Dial in to CON port on a 806 router?!?

I'm using a Hayes Optima 33.6 modem.

Re: Dial in to CON port on a 806 router?!?

New Member

Re: Dial in to CON port on a 806 router?!?

Isn't this for the aux port?

unless I misread it...

anyway I can get it working on the console port since the 806 router doesn't have an aux.

thx

190
Views
0
Helpful
4
Replies