10-07-2002 03:36 PM - edited 03-02-2019 01:53 AM
since the 806 router dosn't have an AUX port, can I dial-in to the console port? If not, how do I go about configuring it remotely if the line fails
10-07-2002 03:42 PM
what modem are you using with 806. US robotics would need special configuration of the modem, before dialing in....also you need to put some commands in the line con 0 mode.
http://www.cisco.com/en/US/tech/tk13/tk426/technologies_configuration_example09186a00800941c9.shtml
is a sample link for USR modem.
Some modems like Zoom, needs string configured in them too...Let us know what modem you ar eusing.
10-07-2002 04:11 PM
I'm using a Hayes Optima 33.6 modem.
10-07-2002 05:16 PM
The above link might be of some help.
10-07-2002 05:35 PM
Isn't this for the aux port?
unless I misread it...
anyway I can get it working on the console port since the 806 router doesn't have an aux.
thx
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: