Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dialer Watch and Dialer Interfaces

hallo,

I need to implement a Backup link for a FR PVC via ISDN BRI interface.

I would use Dialer Watch feature.

Examples I saw uses always BRI interface with "dialer map ip ...." commands (legacy DDR).

Can I use Dialer Watch with DIALER INTERFACES ?

thankyou

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Dialer Watch and Dialer Interfaces

Here is the link which has sample config of isdn line configured using the dialer-profile (dialer interface) as a bckup of FR line using dialer-watch.

http://www.cisco.com/warp/public/793/access_dial/bri_isdn_11048.html

Basically dialer-map or dialer inaterface with dialer string will manage the dialing part and dialer-watch OR watched routes will trigger isdn to dial. So you can use either dialer-map or dialer interface with dialer string etc.

1 REPLY
Cisco Employee

Re: Dialer Watch and Dialer Interfaces

Here is the link which has sample config of isdn line configured using the dialer-profile (dialer interface) as a bckup of FR line using dialer-watch.

http://www.cisco.com/warp/public/793/access_dial/bri_isdn_11048.html

Basically dialer-map or dialer inaterface with dialer string will manage the dialing part and dialer-watch OR watched routes will trigger isdn to dial. So you can use either dialer-map or dialer interface with dialer string etc.

114
Views
0
Helpful
1
Replies
CreatePlease to create content