Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dialer Watch issue - bug !!???

Hi, my name is Steven. I face a very weird problem about dialer watch. After i done my router configuration, i simulate the frame-relay link down. on my isdn backup router, i saw the following debug dialer output:

00:07:25: DDR: Dialer Watch: watch-group = 1

00:07:25: DDR: network 172.168.60.0/255.255.255.0 DOWN,

00:07:25: DDR: primary DOWN

00:07:25: DDR: Dialer Watch: Dial Reason: Primary of group 1 DOWN

00:07:25: DDR: Dialer Watch watch-group 1 -

dialer map/string not present on BR1/0

It's telling me that the dialer map or dialer string have not been specified on the router. But the dialer map command is already there. I have tried IOS version 12.1(12a) and 12.2(7b) on my 3640 router, but neither is working. I hope someone can shed some light here.

regards,

Steven

1 REPLY
New Member

Re: Dialer Watch issue - bug !!???

Hi.

Steven, are you sure you have something like the following in your BRI1/0 interface?

"dialer map ip 172.168.60.0 name XXXX dial-string"

Sorry to ask, but I usually forget to configure dialer-maps for the networks that dialer-watch is watching!

Rgds.

NM

141
Views
0
Helpful
1
Replies