We are using a 2511 (IOS 11.1) attached to a bank of modems to provide dialout support on our network by using reverse telnet to rotary port 7001. Occasionally individual router ports seem to lock DTR low with the result we can no longer dial from that port even though we can attach to it. Resetting the modem has no effect, nor does 'clear line' or 'clear int'. Resetting the entire router does in fact clear the problem. Does anybody have any ideas what causes this problem and how to prevent it?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...