Dialup into 3620 w/ 24pt MICA can't access MS WWW server with NLB
I have users dialing up into a 3620 with a 24 modem MICA board. They access one of the intranet WWW servers as part of their normal duties. The WWW site is actually homes on two servers with microsoft Network Load Balancing set up on the adapters. This is similar to how HSRP is configured.
The problem is that when a dialup user attempts to access the virtual address (through HTTP, Ping, etc), they don't get anything. However, accessing the physical IPs works fine. These users can access any other resource on the network fine as well. Users through our VPN and users on the local LAN don't have any issues with the WWW server whatsoever.
Re: Dialup into 3620 w/ 24pt MICA can't access MS WWW server wit
On the 3620 do you a see a "ip route x.x.x.x" for the virtual address, ie, can we ping it from the 3620? From the 3620 try an extended ping to the virtual address with different source addresses on the 3620 (maybe the loopback0 if used for ip unnumbered under the interface group-async)
How are ip addresses assigned for the dialup users, locally or do they come in with a static ip address.
If these dialup users can reach else where w/o problems that means we have some routing issue here.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...