11-19-2003 12:33 AM - edited 03-02-2019 11:49 AM
I have 3640A router with 48 digital modems and 2 E1 controllers and authentication is done by Cisco ACS. But when the users dial to access server some times they get messege "Remote computer did not respond"and Error 691. And if user get connected but after some time they get disconnected.
here is the configuration of router.
Building configuration...
Current configuration : 2249 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname jadawelNAS
!
no logging console
aaa new-model
aaa authentication ppp default group radius
aaa authorization network default group radius
aaa accounting update newinfo
aaa accounting network default start-stop group radius
enable secret xxxx
!
username test password xxxx
ip subnet-zero
!
!
no ip domain-lookup
ip name-server 212.71.32.19
ip name-server 212.71.32.20
!
!
signaling-class cas JADAWEL
!
controller E1 0/0
framing NO-CRC4
ds0-group 0 timeslots 1-10 type r2-digital r2-compelled ani
ds0-group 1 timeslots 11-15,17-20 type r2-digital r2-compelled ani
ds0-group 2 timeslots 21-31 type r2-digital r2-compelled ani
description E1tothe30portDM
!
controller E1 0/1
framing NO-CRC4
ds0-group 0 timeslots 1-10 type r2-digital r2-compelled ani
ds0-group 1 timeslots 11-15,17-20 type r2-digital r2-compelled ani
!
!
!
interface FastEthernet0/0
ip address 10.65.1.3 255.255.255.0
no ip mroute-cache
speed auto
full-duplex
no cdp enable
!
interface Group-Async1
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
async mode interactive
peer default ip address pool jadawal_POOL
ppp authentication pap chap
group-range 65 94
!
interface Group-Async2
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
async mode interactive
peer default ip address pool jadawal_POOL
ppp authentication pap chap
group-range 97 114
!
ip local pool jadawal_POOL 10.65.1.10 10.65.1.200
ip classless
ip route 0.0.0.0 0.0.0.0 10.65.1.1
ip route 0.0.0.0 0.0.0.0 213.210.219.97
no ip http server
!
ip radius source-interface FastEthernet0/0
no cdp run
radius-server host 10.65.1.2 auth-port 1645 acct-port 1646
radius-server retransmit 3
radius-server key xxxx
!
line con 0
line 65 94
flush-at-activation
modem InOut
modem autoconfigure discovery
transport preferred none
transport input all
autoselect during-login
autoselect ppp
line 97 114
flush-at-activation
modem InOut
modem autoconfigure discovery
transport preferred none
transport input all
autoselect during-login
autoselect ppp
line aux 0
line vty 0 4
password xxxxx
!
end
11-19-2003 03:59 AM
Hello,
what OS do they clients have that are trying to dial in ? Sounds more like a Microsoft error, you might want to do a search for 'error 691' at the following site:
http://support.microsoft.com/default.aspx?scid=FH;EN-US;KBHOWTO&sd=GN&ln=EN-US
Regards,
GP
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: