Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Difference between WS-X6066-SLB-S and WS-X6066-SLB-APC

Dear all

I have two 6509 chassis with Sup720 and MSFC3.

Additionally I have one module

"CSM with SSL"   WS-X6066-SLB-S-K9  Hw. 1.2, Sw. 2.2(1)

and one module

"SLB Application Processor Complex"  WS-X6066-SLB-APC Hw. 1.6, Sw. 4.3(1)

I am searching the Cisco site up and down and cannot really tell the difference between these modules.

So what's the difference?

And would it be possible to run the same software on both CSM modules?

As far as I see 4.3(5) is the latest release for the WS-X6066-SLB-APC, but what about the WS-X6066-SLB-S-K9?

Thanks for any hints,

Grischa

1 REPLY
Hall of Fame Super Blue

Re: Difference between WS-X6066-SLB-S and WS-X6066-SLB-APC

grischast wrote:

Dear all

I have two 6509 chassis with Sup720 and MSFC3.

Additionally I have one module

"CSM with SSL"   WS-X6066-SLB-S-K9  Hw. 1.2, Sw. 2.2(1)

and one module

"SLB Application Processor Complex"  WS-X6066-SLB-APC Hw. 1.6, Sw. 4.3(1)

I am searching the Cisco site up and down and cannot really tell the difference between these modules.

So what's the difference?

And would it be possible to run the same software on both CSM modules?

As far as I see 4.3(5) is the latest release for the WS-X6066-SLB-APC, but what about the WS-X6066-SLB-S-K9?

Thanks for any hints,

Grischa

Grischa

They are both load-balancing modules but the WS-X6066-SLB-S-K9 is capable of load-balancing SSL as it has a inbuilt SSL daughter card which the WS-X6066-SLB-APC does not.

No the same software is not run on both modules, the latest version of the CSM-SSL module (WS-X6066-SLB-S-K9) is 2.2(5).

Jon

1198
Views
0
Helpful
1
Replies