Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Directing dial-in users to certain dialer profiles on PRI

Hi there,

I have a question about directing calls coming into a PRI on an AS5x00 to certain dialer interfaces based on the calling #. I'm aware I can do modem-pools based on the called #, but need to be able to make sure certain calls coming in go to seperate dialer/virtual interfaces so they get proper IP subnet, etc for that site. Also, inbound calls that we don't need to redirect to a certain interface would go to a dialer interface with ip pool for general dial-in use.

I've been looking around on CCO but haven't been able to come across any samples, etc that come close to doing this. Just curious if it is possible without getting a seperate # for each PRI, etc. Currently have 5 PRIs in 1 hunt-group with 1 #.

Thanks, Erick

2 REPLIES
New Member

Re: Directing dial-in users to certain dialer profiles on PRI

It sounds like you might want to look into doing virtual profiles with aaa.

Virtual-profiles:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/vprof.htm

Josh

Re: Directing dial-in users to certain dialer profiles on PRI

Thanks Josh. I take it you can't do this without AAA?

87
Views
0
Helpful
2
Replies