Disabling incoming calls on the ISDN bri interface.
I have a query on the incoming calls on the ISDN interface. Is there any way to disable incomming calls on the ISDN interface but allow out going calls through that interface. The topology is explained below.
The Central site is connected to a remote site via ISDN link. The remote site is having a 1750 router with ISDN (BRI)interface card. The policy of the organization states that only remote site should trigger an ISDN call to Central site and vice versa is not permitted.
Keeping the above topology in view. Is there any command that will deny all incomming calls and permit only outgoing calls ( initiated using dialer map statements).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...