We are a big BICSI corporate member, and do a lot of Structured Cabling System (SCS) design. Under BICSI, the new standard for design specifications will be under Division 25000. (following the CSI model) The LAN section is 252xx, the WAN is 255xx, and Voice is 253xx. Are there any other consultants and designers utilizing the new Division 25 format yet?
No, I am referring to design standards. In order to write up a network specification, it should be formatted correctly. The accepted standard in all of construction, to include plumbing, electrical, masonary, etc. are the division standards. Telecommunications is the proposed Division 25 format. Most integrators don't write up full designs, just do them. Division 25 covers all configurations, and installation procedures. Please feel free to contact me at firstname.lastname@example.org if you have any further questions.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...