Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

DLSW NETBIOS reachability cache list EMPTY

Hi,

I've 2 router with peer DLSW between 2 lan.

I need that netbios hosts can communicate using DLSW.

I've some offices that are working fine with the attached conf.

You can see that the NETBIOS reachability cache list is empty !!! on one side.

I don't known why ?

***********

cisco 1720 with 12.2.8T5 ibm

sh dlsw peers

Peers: state pkts_rx pkts_tx type drops ckts TCP uptime

TCP r.r.r.r CONNECT 26634 2497 conf 0 0 0 20:50:23

DLSw Local NetBIOS Name reachability cache list

NetBIOS Name status Loc. port rif

DLSw Remote NetBIOS Name reachability cache list

NetBIOS Name status Loc. peer

A0208050 FOUND REMOTE r.r.r.r (2065)

***CONF

dlsw local-peer peer-id l.l.l.l biu-segment

dlsw remote-peer 0 tcp r.r.r.r

dlsw bridge-group 1

!

interface Loopback0

ip address l.l.l.l o.o.o.o

!

interface FastEthernet0

ip address x.y.z.u

speed auto

bridge-group 1

!

bridge 1 protocol ieee

!

1 REPLY
Community Member

Re: DLSW NETBIOS reachability cache list EMPTY

Any update on this/

230
Views
0
Helpful
1
Replies
CreatePlease to create content