Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

dmz

Hi all , if I set up a pix, can all internal users access the dmz fully, but you have to open up any web inbound traffic to it ?

4 REPLIES

Re: dmz

Hi

yes they can access but before that make sure u define nat on dmz interface.

Thanks

Mahmood

New Member

Re: dmz

Hi Carl,

To Access from Inside interface to Outside or DMZ we need to do (nat or no nat)/global command (Higher Security Zone to Lower Security Zone always permited )

To Access from Outside or DMZ to Inside we need to configure Static Nat and Access-list (Lower Security Zone to Higher Security Zone always blocked)

Rgd

Danny

New Member

Re: dmz

So can anyone show me a simple setup for this ? is things in the dmz always natted for outside access, but you can use the real address when coming from the inside ?

99
Views
0
Helpful
4
Replies