10-16-2003 06:25 AM - edited 03-02-2019 11:03 AM
When I do Resource Manager Essential>Configuration Management> Network Show Command> and try to submit a show command (i.e. show cdp...)on any device the application shows this message:
Report for 10.1.1.1
Error: PGM_NM=Configuration Archive:6787:TYPE=unassigned message file:Failed to execute commands for device:10.1.1.1
Probable cause:PGM_NM=Configuration Archive:6787:TYPE=unassigned message file:Failed to send command to remote host:Did not get device prompt
Recommended action:check connection to remote host
And all device are working fine and snmp community is fine too and I cand see device in others CiscoWorks options (i.e. syslogs, campus)
Cisco Works2000, RME3.3,on a Windows2000 server
Thanks
Windston
Solved! Go to Solution.
10-20-2003 07:19 AM
Almost sounds like you have incorrect telnet passwords configured in your archive , I would check those as it uses a telnet session to do these commands .
10-20-2003 07:19 AM
Almost sounds like you have incorrect telnet passwords configured in your archive , I would check those as it uses a telnet session to do these commands .
10-23-2003 07:44 AM
Thats rigth
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide