I have 2 G4908XL switches that are aggregates for 12 3548XL stacks. I have 15 VLANs configured other than VLAN1. VLAN1 has an address range of 172.16.0.0/20. Each VLAN has an address range of 10.2.4.0/23, 10.2.8.0/23, 10.2.12.0/23....on and on. We have 10 Netware 5.1 servers for file/print. When I put a workstation into a VLAN other than VLAN1 (where all the servers are) I often have trouble opening Word documents. They either take a long time to open or they become corrupted. Any ideas?
This is something I have seen many times, and you will see the same on excel, power point and similar documents. Not much you can do to alleviate the problem, as the way these programs open the files makes traversing layer 3 devices problematic.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...