03-12-2002 01:32 PM - edited 03-01-2019 08:50 PM
We have several 2610 routers and would like to know if they support the trunking of 2 or more T1's. If so what would be the memory and IOS needed?
03-12-2002 04:26 PM
What exactly do you mean by T-1 trunking?
03-13-2002 04:45 AM
Having 2 or more T1's connected to the same routers over a WAN link. This will give you a 3meg pipe between the sites. It will also allow you to keep working if one of the T1's fail but with half the bandwidth.
03-13-2002 08:11 AM
This would be MultiLink PPP, and yes the 2600 can do it. Equal cost IP load balancing can achieve a similar result without the extra CPU resources that MPPP requires (provided your running fast-switching or CEF).
Regards,
Brad
03-13-2002 10:59 AM
What type of WIC would I need to Support the 2 T1's coming into the router? The T1's are from the ISP and the router sits on the outside of the PIX.
03-13-2002 01:49 PM
Greetings:
Take a look at this URL.
You will need a NM- something module for the large slots and then choose a WIC for your needs to put in the NM module(s). You have the choice of either ones with/without CSU's.
Thanks...Steve
03-14-2002 04:50 AM
Thanks for all your help everyone.
Mike Hiers
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: