Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Does Appletalk work over Multilink PPP?

We are using MLP to bond two T1 lines and are running IP, IPX, and Appletalk over it. IP and IPX work fine and the Appletalk routes appear in the routing table. Appletalk pings between the routers work, but pings to workstations across the MLP link don't work. And servers on the other side of the MLP link are not visible. The routers are a 3600 and a 7200.

1 REPLY
Anonymous
N/A

Re: Does Appletalk work over Multilink PPP?

In general, Appletalk should work

find over MPPP - in fact, there isn't

much of a difference with Apple over

PPP as over MPPP. If you see routes

in the routing table, pings work between

the routers, but further pings do not

work, I would suspect the the Apple

portion of the network and not the MPPP.

To confirm, you could disable MPPP, and

see if you can ping with just one

T1 up. If you can, then you will have

to troubleshoot the apple portion

of your network.

89
Views
0
Helpful
1
Replies