Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

does cat1900 support portfast?

Hi,

I believe cat1900 does not support portfast feature but there is a similar spantree start-forwarding option.

Any comments?

Thanks.

Christina

1 REPLY

Re: does cat1900 support portfast?

Hi Christina,

In 1900 switch where there is a menu option there is an option to enable port fast mode under Port Configuration Menu

Have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v9x/28icg9x/28icoutb.htm#xtocid1786318

If you have 1900 switch where you need to configure port fast you can use command " spantree start-forwarding "

Use the spantree start-forwarding interface configuration command to enable Port Fast forwarding mode for a nontrunk switch port

Have a look at this

http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v8x/eecli8x/clipart2.htm#xtocid39

This command is similar to spantree portfast command in other high end switches.

HTH, if yes please rate the post.

Ankur

117
Views
5
Helpful
1
Replies