Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

does ios router have "split-tunnel" when using ipsec?

Hi All,

In PIX, when use ipsec to connect to vpn client, there is a "split-tunnel"command so that the client just use the ipsec tunnel for the internal traffic. But for router, I search cisco web site (because I have on routers in my side now) I can not find the command. can router split tunnel when connect to vpn client?

Thank You!

Best Regards

Teru Lei

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: does ios router have "split-tunnel" when using ipsec?

Hi Teru,

you can do split tunneling in IOS router too. You can write an ACL to specify the interesting traffic. This interesting traffic is encrypted and the traffic that doesnt match the ACL is not encrypted. Check the example configuration below :

http://www.cisco.com/en/US/customer/tech/tk583/tk642/technologies_configuration_example09186a00800a393b.shtml#split

hope this helps...

1 REPLY
New Member

Re: does ios router have "split-tunnel" when using ipsec?

Hi Teru,

you can do split tunneling in IOS router too. You can write an ACL to specify the interesting traffic. This interesting traffic is encrypted and the traffic that doesnt match the ACL is not encrypted. Check the example configuration below :

http://www.cisco.com/en/US/customer/tech/tk583/tk642/technologies_configuration_example09186a00800a393b.shtml#split

hope this helps...

109
Views
0
Helpful
1
Replies