Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

drops and flushes

FastEthernet0/0 is up, line protocol is up

Hardware is i82543 (Livengood), address is 000b.452f.7408 (bia 000b.452f.7408)

.

Last clearing of "show interface" counters never

Input queue: 0/75/5775/142350 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

30 second input rate 23000 bits/sec, 31 packets/sec

30 second output rate 269000 bits/sec, 62 packets/sec

1444160094 packets input, 3757484726 bytes

Received 6942143 broadcasts, 0 runts, 0 giants, 5030 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog

0 input packets with dribble condition detected

1682259161 packets output, 774377895 bytes, 0 underruns

0 output errors, 0 collisions, 3 interface resets

0 babbles, 0 late collision, 0 deferred

1 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

According to one of the above lines,

Input queue: 0/75/5775/142350 (size/max/drops/flushes); Total output drops: 0

What is the major different between drops and flushes here?

Thanks,

2 REPLIES

Re: drops and flushes

New Member

Re: drops and flushes

Hi,

Try looking up the "counters basic" command for RIP and IGRP.

103
Views
0
Helpful
2
Replies