We have a 1721 with Frame relay and ADSL connections to the internet. I'm wanting to route all tcp port 80,21,443 traffic for my internal network out the ADSL port unless its down in which case i want to switch to frame. I also have a DMZ network (seperate subnet) which must always send tcp port 80,21,443 traffic to the frame. Is this possible?.
Thanks for the help, i've implemented policy based routing and I now have the required traffic outbound on adsl. However i'm a little confused as to how to provide fail-over to the frame in case the adsl drops (as it often does).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...