i have a situation with 2 overlapping networks that need to communicate using a 1720 with one ethernet interface e0 188.8.131.52 255.255.255.240 the station that needs to join the network is 184.108.40.206 255.255.255.0 which is already in use on another router interface that is part of the network. There is a station that needs to send to .30 over the WAN with the address of 220.127.116.11 255.255.255.0, none of these addresses can be changed yet. Is there a solution for this mess. Any help would be appreciated.
You can NAT the host address to something else and use static host routes. Just make sure that every particpating device knows if they talk to that host or that router's interface. You have to resolve conflicts.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...