Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Duplicate IP Addresses

Duplicate IP Addresses

Which command would indicate Duplicate IP Addresses:

Sh interfaces or sh logging??

Thanks in advance.

3 REPLIES

Re: Duplicate IP Addresses

With sh logging you can see messages regardin duplicate IP address detected by the router.

Cheers

New Member

Re: Duplicate IP Addresses

Hi Georg,

I've tried sh logging and didn't see any messages related to duplicate address.

Here is what I did:

1. Connected 2 2503 serial ports with back to back cable.

2.Configured ehternet ports on both with no keepalive to bring them to up/up state.

3. Enabled RIP routing on both

4. Configured e0 on one router matching ip address of s0 of another router

5. Issued sh logging on both routers-no duplicate message was lobserved.

Please advice.

Thanks

Joseph

Bronze

Re: Duplicate IP Addresses

the setup you have is not going to work because you cannot have interfaces on same network on a router. from my understanding it shouldn't allow you to assign an IP address on the S0 interface on the same network as Ethernet interface.

126
Views
0
Helpful
3
Replies