Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Dynamic IPSEC details reqd

Hi all

I m facing difficulties in issuing the below mentioned config command in my 1751 router to enable dynamic ipsec.

i m running 12.2(4)T3 at present having 32MB DRAM and 16MB Flash.no issues in enabling ipsec with my current setup but i need to have the dynamic setup installed.

which ios i can use to hve my router with above said config can hve the command mentioned below.

thx for any help in advance

Command Syntax :

crypto isakmp client configuration group 3000cli

key cisco123

pool ippool

!

regds

prem

1 REPLY
Silver

Re: Dynamic IPSEC details reqd

Prem, I think you are looking for a feature call Easy VPN sever, which was introduced in 12.2(8)T.

If you want to install you require 16MB flash and 48MB DRAM.

You can see more details about the configuration of different types of VPN and the requirement in the following links:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087d1e.html#wp1060543

http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/ns27/networking_solutions_white_paper09186a0080186fda.shtml

http://www.cisco.com/en/US/netsol/ns341/ns396/ns172/ns334/networking_solutions_design_guidance09186a008017e2d3.html

95
Views
0
Helpful
1
Replies