Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Dynamic trunking protocol Timers

Hi

Anyone know if it possible to change DTP timers?

I only have found "show dtp interface" commands but no commands to change DTP configuration.

2 REPLIES
Cisco Employee

Re: Dynamic trunking protocol Timers

Which device is this? Please paste the output of sh version and "sh dtp interface"

Community Member

Re: Dynamic trunking protocol Timers

Hi

A "show ver":

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(6)EA2a, RELEASE SOFTWARE

(fc1)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Thu 27-Dec-01 15:01 by antonino

Image text-base: 0x80010000, data-base: 0x8042A000

ROM: Bootstrap program is CALHOUN boot loader

P21VPA-SWT023-24 uptime is 2 days, 8 hours, 37 minutes

System returned to ROM by power-on

System restarted at 10:47:43 gmt Tue Sep 17 2002

System image file is "flash:c2950-i6q4l2-mz.121-6.EA2a.bin"

cisco WS-C2950-24 (RC32300) processor (revision C0) with 21299K bytes of memory

Processor board ID FHK0608Y106

Last reset from system-reset

24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:08:E3:D2:16:C0

Motherboard assembly number: 73-5781-09

Power supply part number: 34-0965-01

Motherboard serial number: FOC060802YW

Power supply serial number: DAB06060TDY

Model revision number: C0

Motherboard revision number: A0

Model number: WS-C2950-24

System serial number: FHK0608Y106

Configuration register is 0xF

And a "show dtp interface":

P21VPA-SWT023-24#sh dtp interface fastEthernet 0/23

DTP Interface Information:

TOS/TAS/TNS: TRUNK/DESIRABLE/TRUNK

TOT/TAT/TNT: 802.1Q/802.1Q/802.1Q

Neighbor address 1: 0009B755792E

Neighbor address 2: 000000000000

Hello timer expiration ms/state: 12052/UNEXPIRED

Access timer expiration ms/state: 283684/UNEXPIRED

Negotiation timer expiration ms/state: 0/STOPPED

Multidrop timer expiration ms/state: 0/STOPPED

FSM state: S6:TRUNK

# times multi & trunk: 0

Enabled: 1

In STP: 0

Thanks

Octavio

596
Views
0
Helpful
2
Replies
CreatePlease to create content