Cisco Support Community
Community Member

Dynamic VLAN Assignment

I've read that in order to use Dynamic VLAN assignment, the enhanced image is required, but I've seen in other places that only the standard image is required. What is it? And how can I tell what image I have and whether this will work? I have the following equipment:

-- 2 x Catalyst 3750 --

Model: WS-C3750G-24TS

Software: 12.1(19)EA1d-SMI

-- 6 x Catalyst 2950 --

Model: WS-C2950SX-48-SI

Software Version: 12.1(22)EA1b-C2950-I6Q4L2-M

Thank you.

Cisco Employee

Re: Dynamic VLAN Assignment

VMPS client functionality is supported in both EMI and SMI versions of 3750 and 2950 but neither switch support VMPS server functionality and you will need one to act as server.

Community Member

Re: Dynamic VLAN Assignment

I wasn't planning on using VMPS. I was going to use 802.1x with a Radius server. The Radius server would query Active Directory to determine what VLAN the user or computer belonged to. With regards to this, does the 3750 and 2950 support Dynamic VLAN assignemnt (i.e. accept flags from a Radius server)?

CreatePlease to create content