Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

E1 configuration

on AS5300 with 8 E1 on it, can we configure 7 of them with R2 signaling and 1 with ISDN, can it be done?

1 REPLY
Anonymous
N/A

Re: E1 configuration

It's possible , you have to configure the E1 controllers like that , that is each E1 interface coresponds to one E1 controller , configure 7 controllers for R2 signaling like

controller e1 slot/port

cas-group channel timeslots range type {r2-analog | r2-digital | r2-pulse} [dtmf | r2-compelled [ani] | r2-non-compelled [ani] | r2-semi-compelled [ani]]

cas-custom channel

and one with ISDN signaling

controller e1 slot/port

framing no-crc4

line code hdb3

pri-group timeslots 1-24

E1-R2 config link

http://www.cisco.com/en/US/products/sw/iosswrel/ps1826/products_feature_guide09186a00800dc5cf.html

309
Views
0
Helpful
1
Replies