Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

E1 ds0-groups on 3660 and 2620

On a 3660 router , I can define ds0-group 0 to 30 continuously which will

give me 1 signalling channel and 30 voice channel. for example :

3660(config)#controller e1 3/0

3660(config-controller)#ds0-group ?

<0-30> Group number

whereas on a 2621 the IOS only allows me to define ds0-group from 0-14 and 16-30 which is 1 signalling and 29 voice channels. for example :

2621(config-controller)#ds0-group ?

<0-14> Group number

<16-30> Group number

Does anyone know why this happens ?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: E1 ds0-groups on 3660 and 2620

This is CSCdx27358 (title: E1 controller does not allow ds0-group 15) , fixed as of 12.2(10.5)/12.2(10.5)T. Try something latest 12.2 like 11T, 13T or 15T.

~Zulfi

2 REPLIES
Bronze

Re: E1 ds0-groups on 3660 and 2620

This is CSCdx27358 (title: E1 controller does not allow ds0-group 15) , fixed as of 12.2(10.5)/12.2(10.5)T. Try something latest 12.2 like 11T, 13T or 15T.

~Zulfi

New Member

Re: E1 ds0-groups on 3660 and 2620

Thanks but I actually needed to use all groups including 15.

The bug is actually CSCdz28475. The fix should be available in 13.T1.

100
Views
0
Helpful
2
Replies
CreatePlease to create content