I have a Cisco 7100 (hub router) and a Cisco 2600 (Site router) connected via Cisco vpn (ISAKMP Crypto maps etc) At the moment, static routes are doing the job at the moment but I would like to move to EIGRP as this is the Enterprise company standard for Europe and USA.
I have amended the inbound extended access list to allow EIGRP updates but I am still not seeing any routing data coming in.
Here is the ameded access list (without IP addresses for security)
For EIGRP to work across an IPsec tunnel, you will need to use a GRE tunnel so that broadcast/multicast packets can be exchanged. If you do not wish to use GRE (because of the impact on MTU or CPU loading) you can do the job with BGP, which does not require neighbors to be physically adjacent the way IGPs like EIGRP and OSPF do. There is an example of each approach in the Redundant VPN white paper on my web site (just replace the use of OSPF in the GRE example with EIGRP).
Warning Note: If the above plethora of buzzwords and acronyms is undecipherable, do your homework and make sure you understand the points being made _BEFORE_ you change the design of your currently working network. Good luck and have fun!
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.