Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EIGRP problem on 3 interconnected sites

Hi All,

I have a problem enabling our 3 interconnected sites to EIGRP routing.

Please refer to my attachment for detailed view on our network.

Problem scenario:

1. No problems when eigrp is enabled between Router A & Router B:

config use on both routers:

router eigrp 100

network 11.0.0.0

no auto-summary

redistribute static

2. When eigrp is enabled on Router C using the same eigrp setting:

router eigrp 100

network 11.0.0.0

no auto-summary

redistribute static

Probles stated below will occur:

a. Routes from Router B to Router A (eg; 11.200.0.0) will go through Router C instead directly goes to Router A.

b. Routes from Router B to Router C (eg; 11.100.0.0) will go through Router A instead directly goes to Router C.

Questions;

1. Why does happens? Did I miss something or my configs are wrong?

2. Disabled redistribute static, but still the same problem. Why does EIGRP overrides the static route settings.?

3. Does static routes always comes first before EIGRP?Or when EIGRP is enabled does it take over the static route settings?

Currently we are using static on our intranet network.

These are our intranet routers excluding our Internet Gateway routers.

Our intranet connections consist of E1 & T1.

Current Routing interface settings:

Router A:

S2/0:0 --> Router C

S2/1:0 --> Router C

S2/2:0 --> Router B

Router B:

S1/0:0 --> Router B

S1/1:0 --> Router C

Router C:

S 3/0:0 --> Router A

S 3/1:0 --> Router A

S 3/2:0 --> Router B

I really need help on this, It's really a burden for us when one of our intranet connections goes down.

Thanks also i advance..

Cliff

3 REPLIES
New Member

Re: EIGRP problem on 3 interconnected sites

Hi Cliff :

could you paste the output using sh ip route and sh ip eigrp top detail on Router a,b,c.

thank you.

New Member

Re: EIGRP problem on 3 interconnected sites

ji-zhu,

Unfortunately i was not able to save those show ip route & show ip eigrp topology results.

But as simulation, it looks like this:

RouterB# show ip eigrp topology

P 11.200.0.0/16, 1 successors, FD is 2172416

via 11.30.1.1 (2172416/28160), Serial1/0:0 > Router C

P 11.100.0.0/16, 1 successors, FD is 2684416

via 11.50.1.1 (2684416/540160), Serial1/0:0 > Router B

Additional Info:

Router A:

S2/0:0 --> Router C 11.40.1.2

S2/1:0 --> Router C 11.20.1.2

S2/2:0 --> Router B 11.50.1.1

Router B:

S1/0:0 --> Router A 11.50.1.2

S1/1:0 --> Router C 11.30.1.2

Router C:

S 3/0:0 --> Router A 11.40.1.1

S 3/1:0 --> Router A 11.20.1.1

S 3/2:0 --> Router B 11.30.1.1

Sorry, i could'nt give a detailed of it.

Cliff

Re: EIGRP problem on 3 interconnected sites

can u pls share the "sh ip route" & "sh run" of router B.

113
Views
0
Helpful
3
Replies