I have redistribute ospf routes and eigrp routes(IOS12.2) mutually,but I found there is ' via Rconnected' when issue show ip eigrp top (the network of its relative output is x.x.x.x/32 ---host address of a s1/0 inside eigrp domain)
No,the interface addresss is 18.104.22.168/29 included in eigrp domain which dircetly connected the border router(with int 22.214.171.124/29).the remainder interface runs ospf .But when I carry out 'show ip eigrp top ',there is a line output as "P ....126.96.36.199/32 ...via Reconnected"
this route will aslo be redistributed into ospf(there is another E1 route as 188.8.131.52/29 in ospf 's route table)
what means "Reconnect"? and is the route
D 184.108.40.206/32 should occor?
How can I do something on the LSA DB in ospf or TLV DB in eigrp ?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.