Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

eigrp setup on serial

is it possible to advertise eigrp across my serial when I dont have an ip on the interface, its using ip unnumbered !!

3 REPLIES
Blue

Re: eigrp setup on serial

it is possible to advertise eigrp across an unnumbered interface.

see this link for some details:

http://www.cisco.com/en/US/tech/tk365/tech_configuration_examples_list.html

Re: eigrp setup on serial

hi carl,

will you clear me in detail what you exactly want.

regards

Devang

Re: eigrp setup on serial

I believe he wants to stablish EIGRP neighbor adj on a serial interface without an IP, using unnumbered.

with OSPF you can do it:

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9e0.shtml

I guess the same would work on EIGRP. try it and let us know.

HTH,

if it does, please rate this post.

Vlad

sample config:

"interface FastEthernet0

description Local LAN

ip address 10.0.0.22 255.255.0.0

speed 100

full-duplex

!

interface Serial0

description WAN Circuit

bandwidth 2048

no ip address

encapsulation frame-relay IETF

no fair-queue

frame-relay lmi-type ansi

!

interface Serial0.123 point-to-point

ip unnumbered FastEthernet0

no cdp enable

frame-relay interface-dlci 123 IETF

!

router eigrp 10

network 10.0.0.0

no auto-summary

"

196
Views
0
Helpful
3
Replies
CreatePlease to create content