02-21-2006 02:56 AM - edited 03-03-2019 01:55 AM
Is it possible for me to adjust my eigrp timer updates between 2 sites so that it doesnt keep bring up my isdn line ?
02-21-2006 03:08 AM
Hi Carl
To my best knowledge, I think the soultion would involve something like this
router eigrp 64
passive-interface Serial0
network 10.1.1.0 0.0.63.255
network 172.17.5.0 0.0.0.255
no auto-summary
The passive-interface command on the right interface (which in your case would be bri0 or s0) should do the trick)
Im just a newbie though .. would like a second opinion on this :)
02-21-2006 03:23 AM
I would also agree. Putting the Bri0 interface as a passive interface would keep the line from coming up from routing updates from exiting the interface.Using passive interfaces in EIGRP will suppress incoming and outgoing routing updates on that interface, along with Hello messages. The bad thing about this is you will lose your neighbor relationship with the connected router on the bri0 interface.
Since they are connected, you should still have a route pointing to the connected router out of the bri0 port. If not you can use a static ip route.
This link my be helpful.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0a.shtml
Hope this helps and please rate!
Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide