I have an existing network ( 18.104.22.168) with eigrp working on AS 10 at the main site (rtrA). At the remote site, also eigrp AS 10 with network 22.214.171.124 (rtrB). This two are connected together.
I have a new link from the same router (rtrA) going to a new router at a remote site (126.96.36.199 - rtrC) . I do not want to disturb eigrp AS 10 but want access between the same network at this site and the remote end.
Can I create a new eigrp AS say 20 at both ends with the same network number 188.8.131.52. will routing updates be exchanged between rtrA and rtrC without disturbing the previous routes?
"I do not want to disturb eigrp AS 10 but want access between the same network at this site and the remote end."
Could you clarify? Do you want hosts within the 184.108.40.206 network to be able to access hosts within the 10.0.0.0 network? If you do, then run a single process. If you don't then two seperate processes should be okay.
Don't run two processes and redistribute between them. I could probably repeat that line about 10 times, and not tire of saying it... :-) But I won't. Just take my word for it, almost every melted EIGRP network I've ever worked on has redistribution between two EIGRP processes someplace or another, and it's almost always a contributing factor. I see lot fewer now than a couple of years ago, but I also see a lot fewer melted EIGRP networks now than a couple of years ago. :-)
I would configure the new link in the same autonomous system. It sounds like you need to run no auto-summary, though. Make certain you're running EIGRP on the backside, between the two routers at the remote site, as well.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.