Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Enabling Jumbo/Giant Frame support on 2948G-GE-TX

Hi I am after enabling Giant/Jumbo Frame support on a 2948G-GE-TX in order to improve performance to for an iSCSI network.

I have found documentation on CCO that says this cannot be done on the 2948G-L3 but does not mention the 2948G-GE-TX which has superceeded it.

see link

http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml

Can the MTU size be changed to support jumbo frame upto 9216 bytes? on the 2948-GE-TX.

Thanks in advance.

Colin

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Enabling Jumbo/Giant Frame support on 2948G-GE-TX

Hi

As per the data sheet its 1522bytes which is the max mtu size which u can configure under the Gig interfaces...

http://www.cisco.com/en/US/products/hw/switches/ps606/products_data_sheet09186a00801cfafe.html

regds

1 REPLY

Re: Enabling Jumbo/Giant Frame support on 2948G-GE-TX

Hi

As per the data sheet its 1522bytes which is the max mtu size which u can configure under the Gig interfaces...

http://www.cisco.com/en/US/products/hw/switches/ps606/products_data_sheet09186a00801cfafe.html

regds

1935
Views
0
Helpful
1
Replies
CreatePlease to create content