Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

ns
New Member

Encapsulation on VWIC-2MFT-G703

Hi,

I need to know what encapsulations (FR, PPP, HDLC etc) are available for configuration on a data-only full E1 connection on this interface. I seems that it is not configured as other serial interfaces and the documentation only includes the physical encoding, not l2-l3 configuration options.

Thanks,

Niels

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Encapsulation on VWIC-2MFT-G703

Hi Niels,

first you have to configure "controller e1 /" with the physical properties, but then you will have a serial interface that you can configure just like any other:

controller E1 0/1

channel-group 2 timeslots 1-31

framing crc4

linecode hdb3

no shutdown

interface serial 0/1:2

encapsulation ppp

...

Note that I defined channel-group 2 and hence the interface is numbered :2 automatically. You can use another number of course.

hth

Herbert

2 REPLIES
Bronze

Re: Encapsulation on VWIC-2MFT-G703

Hi Niels,

first you have to configure "controller e1 /" with the physical properties, but then you will have a serial interface that you can configure just like any other:

controller E1 0/1

channel-group 2 timeslots 1-31

framing crc4

linecode hdb3

no shutdown

interface serial 0/1:2

encapsulation ppp

...

Note that I defined channel-group 2 and hence the interface is numbered :2 automatically. You can use another number of course.

hth

Herbert

ns
New Member

Re: Encapsulation on VWIC-2MFT-G703

Great, thanks a lot Herbert.

Niels

161
Views
0
Helpful
2
Replies